WebSwitch™/ WebSwitch Plus™

Overview

Overview | IP Controlled Power Strip

WebSwitch™ Remote Power Switch, is the ideal IP controlled power strip for remote power control, remote reboot, and automatic reboot of network devices using a standard web-browser.

WebSwitch Remote Power Switch with cords

Two, Independent IP Controlled Power Outlets

WebSwitch has two power outlets which can be independently controlled over an IP network using a web browser on a computer or smartphone. It is completely self-contained and includes a built-in web server, so no external servers, or monthly subscriptions are required.

Remote Power Control

Use WebSwitch as a remote control outlet that provides remote power control and/or automatic reboot of these devices: Servers, computers, routers, and other electrical devices.

Automatic Reboot & Remote Reboot Device

When configured for automatic reboot, WebSwitch will periodically ping a designated IP address and wait for a response. If there is no response to the ping, WebSwitch will automatically reboot the powered device in an attempt to restore its normal operation.

If automatic reboot isn’t configured, manual remote reboot can easily be achieved by a simple press of a button on the device’s Control Page.

WebSwitch is available in two models, WebSwitch & WebSwitch Plus!

WebSwitch Plus™

WebSwitch™ Plus provides a more complete solution for remotely controlling servers and monitoring their environment. It includes all of the robust features of the WebSwitch, plus more. Additional features include:

Remote temperature monitoring
Two discrete inputs
Event scheduling
Logging
Email alerts

Both models are engineered to provide excellent performance for many years while running 24/7. You can be confident in using WebSwitch when your critical applications demand reliability and integrity.

Features

WebSwitch

Independently control two power outlets using a standard web browser…no special software required.
Automatic reboot – Use to remotely reboot devices when ping responses fail.
Manual remote reboot
Built-in web server provides direct access to device…no external servers, services or subscriptions required.
Supports HTTP, SNMP, and Modbus/TCP.
“Remote Services” can be used to initiate connection with external servers.
Password protection.
IP filter provides simple firewall.
Selectable TCP Ports.
10/100 Mbps Ethernet connectivity.
Field re-programmable; install firmware updates when available.
Attractive, rugged enclosure made of flame resistant plastic.
Operates worldwide (100-240V AC; 50/60Hz).
Wall mountable or optional rack mounting kit available.

WebSwitch Plus

Temperature and/or humidity sensors can be added for environmental monitoring.
Dry-contact sensors or switches can be connected for local control of outlets or for monitoring external devices.
Real-time clock, can automatically adjusts for daylight savings time, sync with NTP server.
Added relay contact protection.
Event scheduler with yearly calendar.
Customizable email alerts.
Logging – Log outlet changes, automatic reboots, high/low temperatures, network traffic, and more.
System log provides detailed diagnostic information.
Simple scripts can be written in BASIC for advanced functionality.
Configure manually or with DHCP.

WebSwitch Part Numbers (Differences highlighted in green)

PART NUMBER	OUTPUTS	INPUTS	POWER SUPPLY
XRDI-WS3-NA	Relays: 2 (10A 100-240V AC (47-63Hz))	N/A	100-240V AC (47-63Hz)
XRDI-WS3P-NA	Relays: 2 (10A 100-240V AC (47-63Hz))	Digital: 2 (0-5VDC) Temp: 3 (-67°F to 257°F (-55°C to +125°C))	100-240V AC (47-63Hz)
XRDI-WS3-IN	Relays: 2 (10A 100-240V AC (47-63Hz))	N/A	100-240V AC (47-63Hz)
XRDI-WS3P-IN	Relays: 2 (10A 100-240V AC (47-63Hz))	Digital: 2 (0-5VDC) Temp: 3 (-67°F to 257°F (-55°C to +125°C))	100-240V AC (47-63Hz)

Specs

Power Requirements

Voltage: 100-240V AC (47-63Hz)
Input Frequency: 47-63Hz
Input Connector: IEC 320 Appliance Connector (C14 Male)
Max Current: 10A (DO NOT USE WEBSWITCH TO CONTROL MORE THAN 10 AMPS – BOTH OUTLETS)*

Relay Contacts

Number of Relays: 2
Relay Connector: IEC C13 Female
Contact Type: SPDT (Form 1C)
Load Type: General Purpose
Contact Resistance: < 30 milliohms initial
Contact Material: AgSnO2
Electrical Life: 100K cycles (Typical)
Mechanical Life: 10M cycles (Typical)
Environmental Rating: Over voltage Category II, Pollution Degree 2
Relay Modes: ON/OFF or Pulse/Reboot
Pulse Timer Duration: 0.1 to 86,400 Seconds (1-day)

Digital Inputs (WebSwitch Plus ONLY)

Number of Inputs: 2
Type: Non-Isolated
Voltage Range: 0-5VDC
Current: 47K Pullup
Minimum Hold Time: 20ms
Input Isolation: Non-Isolated
Input Functions: Emails Alerts, SNMP Traps

Temperature Sensors (WebSwitch Plus ONLY)

Maximum Number of Sensors: 3
Type: Dallas Semiconductor DS18B20
Temperature Range: -67°F to 257°F (-55°C to +125°C)
Accuracy: ±0.5°C (from -10°C to +85°C)
Sensor Functions: Monitor Temperature, Log Temperature, Email Alerts, SNMP Traps
Humidity Type: Xytronix Model X-DTHS-WM wall mount sensor
Humidity Range: 0-100% RH
Accuracy: ±1.8%

Real-Time Clock:

Manual or NTP(Network Time Protocol) setup
NTP Sync Period: Once, Daily, Weekly, On Powerup
Auto Daylight Savings Adjustment
Battery (capacitor) Power Backup

Capacitor Power Backup (WebSwitch Plus ONLY)

Backup Functions: Retain Real-Time Clock, External Variables, Outlet State.
Backup Duration: 3 days minimum

Network

Type: 10/100 Base-T Ethernet Port
Setup: Static IP address assignment or DHCP, HTTP port selectable (WebSwitch Plus ONLY)

Connectors (WebSwitch Plus ONLY)

Output Connectors: IEC 320 Appliance Connector (C13 Female)
Network: 8-pin RJ-45

LED Indicators

Number of LEDs: 5
- Power on
- Out On 1-2
- Network linked
- Network activity

Physical

Operating Temperature: -4°F to 104°F (-20°C to 40°C)
Size:
- 10.65 inches (27.11 cm) wide
- 1.75 inches (4.44 cm) tall
- 3.29 inches (8.36 cm) deep
Weight: 1 lb. 3 oz. (542 grams)
Enclosure Material: Lexan 940 Polycarbonate Plastic
Enclosure Flame Rating: UL94 V0