X-11s – EMI Softech

Overview

The X-11s 2-relay expansion module is used with an X-400 or X-600M controller. The X-11s has two high-current relays. Both relays have Form-C contacts (SPDT). A rugged, high-current connector provides connections to the relays.

One or more X-11s expansion modules can be connected to an X-600M control module with a ribbon cable. The ribbon cable provides both power and communications to this and other expansion modules.

The X-400 or X-600M with its expansion modules such as the X-11s provides an easy, flexible, and reliable way to monitor and control systems and devices over a network. It is suitable for use with loads which require line voltages and high currents such as pumps, motors, lights and heaters.

Other expansion modules with different I/O combinations are also available.

X-11s Part Number

PART NUMBER	OUTPUTS	INPUTS	POWER SUPPLY
X-11s	Relays: 2 (20A 277VAC, 110VDC (NO contact), 30VDC (NC contact))	N/A	9-28 VDC (supplied via the X-400 or X-600M controller, 24V recommended)

Features

Two, large SPDT relays (independently controlled)
- Voltage: 277VAC, 110VDC (NO contact), 30VDC (NC contact)
- Current: 20A
Removable locking connector supports 24AWG to 10AWG wire
LED indicators for power and relay status
Removable terminal connector
Powered through expansion bus – no separate power supply connections are required
Great for applications including:
- Lighting control
- Door locks
- Remote gate control
- Motor control
- Pumps
- and much more…

Specs

Power Requirements

Voltage: 9-28 VDC (supplied via the X-400 or X-600M controller, 24V recommended)
Max Current: See table below for typical values at 25°C.

Power Supply	All Relays OFF	All Relays ON
9 VDC	15 mA	260 mA
12 VDC	12 mA	196 mA
24 VDC	7 mA	105 mA

Relay Contacts

Number of Relays: 2
Max Voltage: 277VAC, 110VDC (NO contact), 30VDC (NC contact)
Max Current: 20A
Contact Type: SPDT (Form 1C)
Load Type: General Purpose
Contact Resistance: < 30 milliohms initial
Contact Material: AgSnO2
Electrical Life: 100K cycles (Typical)
Mechanical Life: 10M cycles (Typical)
Environmental Rating: Over voltage Category II, Pollution Degree 2
Relay Modes: On/Off or Pulsed
Pulse Timer Duration: 0.1 to 86,400 Seconds (1-day)

Connectors

Relays: 6-Position, 7.62mm, Removable (with tool-free snap-lock latches)
Expansion Connector: Ribbon cable, 10-conductor, polarized, 2×5-position, 0.100″ pitch Provides power and communications for expansion modules (Communications: RS-485)

LED Indicators

Number of LEDs: 3
- Power on
- Relay coil energized 1-2

Physical

Size:
- 1.41in (35.7mm) wide
- 3.88in (98.5mm) tall
- 3.1in (78mm) deep (not including connector)
Weight: 4.8 oz (136 g)
Enclosure Material: Lexan 940 Polycarbonate Plastic
Enclosure Flame Rating: UL94 V0