The X-16s has eight, 0-5V, precision analog inputs and is an expansion module for an X-400 or X-600M controller. The X-16s employs a 24-bit A/D converter and can make both single or differential input measurements. A 5.0V reference output can be used to power potentiometers or other resistance sensing sensors. The X-16s is ideal for measuring precision analog voltages in industrial environments.

One or more X-16s expansion modules can be connected to an X-400 or X-600M controller with a ribbon cable. The ribbon cable provides both power and communications to the expansion modules.

Other expansion modules with different I/O combinations are also available.

X-16s Part Number

PART NUMBER OUTPUTS INPUTS POWER SUPPLY
X-16s N/A Analog: 8 (-0.1V (min), 5.1V (max), all channels) 9-28 VDC (supplied via the X-400 or X-600M controller, 24V recommended)

Features

  • Eight, 0-5V precision analog inputs
  • Removable terminal connector
  • Powered through expansion bus – no separate power supply connections are required
  • Great for monitoring applications including:
    • Temperature
    • Electrical Current
    • Pressure
    • Fluid Levels
    • and much more…

Power Requirements

  • Voltage: 9-28 VDC (supplied via the X-400 or X-600M controller, 24V recommended)
  • Max Current: See table below for typical values at 25°C.
Power Supply Current
9 VDC 40 mA
12 VDC 30 mA
24 VDC 18 mA

Analog Inputs

  • Number of Inputs: 8
  • Type: 8 single-ended, 4-differential, or a combination
  • Input Range: -0.1V (min), 5.1V (max), all channels
    **Note that inputs have high impedance so input range can easily be adjusted using external resistors. Example: 0 to 10 Volt or 4-20mA
  • Resolution: 10μV (24 bit ΣΔ ADC)
  • Reference: 5.00V, 0.04%, 3ppm/C, 50mA Max

Connectors

  • Inputs: 14-Position, 3.81mm terminal spacing, Removable. For 16-28 AWG wire.
  • Expansion Connector: Ribbon cable, 10-conductor, polarized, 2×5-position, 0.100″ pitch Provides power and communications for expansion modules (Communications: RS-485)

LED Indicators

  • Number of LEDs: 1
    • Power on

Physical

  • Size:
    • 1.41in (35.7mm) wide
    • 3.88in (98.5mm) tall
    • 3.1in (78mm) deep (not including connector)
  • Weight: 4.8 oz (136 g)
  • Enclosure Material: Lexan 940 Polycarbonate Plastic
  • Enclosure Flame Rating: UL94 V0

Environmental

  • Operating Temperature: -40°F to 150°F (-40°C to 65.5°C)
  • Storage Temperature: -40°F to 185°F (-40°C to 85°C)
  • Humidity: 5-95%, non-condensing
  • Altitude: Up to 2,000m
  • Indoor use or NEMA-4 protected location

Electromagnetic Compliance

  • IEC CISPR 22, CISPR 24
  • FCC 47CFR15 (Class B)
  • EN55024 ITE Immunity (2010)
  • EN55022 Emissions (2010)

Product Safety Compliance

  • UL 61010-1 (Electrical Equipment for Measurement, Control, and Laboratory Use)
Place your order today! Contact us